Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC71BM-based organic photovoltaic cells.

Herein, we report the synthesis of nontoxic pyrite iron sulfide (FeS2) nanocrystals (NCs) using a two-pot method. Moreover, we study the influence of these NCs incorporated into the PTB7:PC71BM active layer of bulk-heterojunction ternary organic photovoltaic (OPV) cells. The OPV devices are fabricated with the direct configuration glass/ITO/PEDOT:PSS/PTB7:PC71BM:FeS2/PFN/FM. The Field's metal (FM) is a eutectic alloy composed of 32.5% Bi, 51% In and 16.5% Sn by weight that melts at 62 °C. It is deposited on the active layer/PFN under atmospheric conditions. Ternary active layers are prepared by adding small amounts of the semiconducting FeS2 NCs at different weight ratios of 0.0, 0.25, 0.5, and 1.0 wt % with respect to the electron donor PTB7. With respect to the reference device (without FeS2), a 21% increase in the power conversion efficiency (PCE) is observed for OPVs with 0.5 wt % FeS2, such that the PCE of the OPVs is enhanced from 5.69 to 6.47%. According to the Kruskal-Wallis and Mann-Whitney statistical tests, all OPV devices follow the same trend.

Mineral trioxide aggregate enriched with iron disulfide nanostructures: an evaluation of their physical and biological properties.

The purpose of this study was to characterize mineral trioxide aggregates (MTA) enriched with iron disulfide (FeS2 ) nanostructures at different concentrations, and to investigate their storage modulus, radiopacity, setting time, pH, cytotoxicity, and antimicrobial activity. Iron disulfide nanostructures [with particle size of 0.357 ± 0.156 µm (mean ± SD)] at weight ratios of 0.2, 0.4, 0.6, 0.8, and 1.0 wt% were added to white MTA (wMTA). The radiopacity, rheological properties, setting time, and pH, as well as the cytotoxicity (assessed using the MTT assay) and antibacterial activity (assessed using the broth microdilution test) were determined for MTA/FeS2 nanostructures. The nanostructures did not modify the radiopacity values of wMTA (~6 mm of aluminium); however, they reduced the setting time from 18.2 ± 3.20 min to 13.7 ± 1.8 min, and the storage modulus was indicative of a good stiffness. Whereas the wMTA/FeS2 nanostructures did not induce cytotoxicity when in contact with human pulp cells (HPCs) and human gingival fibroblasts (HGFs), they showed bacteriostatic activity against Staphylococcus aureus, Escherichia coli, and Enterococcus faecalis. Adding FeS2 nanostructures to MTA might be an option for improving the root canal sealing and antibacterial effects of wMTA in endodontic treatments.

Fibroblast response to initial attachment and proliferation on titanium and zirconium surfaces / Respuesta de fibroblastos a la adhesión inicial y proliferación en superficies de titanio y zirconio

Introduction: In recent decades, dental implants have become one of the best options for comprehensive dental restoration; their placement is a multidisciplinary task that requires a solid understanding of biological, periodontal, surgical and prosthetic principles. Objective: The aim of this study was to quantify in vitro the adhesion and proliferation of human gingival fibroblasts (HGF) response on titanium (Ti) and zirconia (Zr) surfaces. Methodology: Samples of Ti and Zr were observed under atomic force microscopy (AFM). HGFs were inoculated in each sample to determine adhesion and cell proliferation. The reagent MTT was mixed with medium DMEM and inoculated in each plate; formazan was dissolved with dimethyl sulfoxide and analyzed at 540nm in a microplate spectrophotometer. The test was performed with three independent experiments. Data were analyzed with Kolmogorov-Smirnov tests (Lilliefors), Kruskal-Wallis tests and Mann-Whitney test comparisons. Results: Topography of the Zr plates showed greater roughness (Ra= 0.39 microns) than Ti (Ra= 0.049 microns). Quantification of HGF adhesion was significantly higher (p<0.05) in Ti, while proliferation showed no statistically significant differences between the groups. Conclusion: It is noteworthy that, even though Ti initially showed increased cell adhesion on the surface, after 24h Zr samples showed similar proliferation; this demonstrates that both surfaces have a comparable biological response.

Introducción: En las últimas décadas, los implantes dentales se han posicionado como una de las mejores opciones de restauración dental integral; su colocación es una tarea multidisciplinaria que requiere una sólida comprensión de los principios biológicos, periodontales, quirúrgicos y protésicos. Objetivo: El objetivo de este estudio fue cuantificar in vitro la adhesión y proliferación de la respuesta de fibroblastos gingivales humanos (HGF) en superficies de titanio (Ti) en contraste con superficies de zirconia (Zr). Metodología: Se observaron las muestras de Ti y Zr bajo microscopía de fuerza atómica (AFM). Los HGF fueron inoculados en cada muestra para determinar la adhesión y proliferación celular. El reactivo MTT se mezcló con medio DMEM y se inoculó en cada placa, el formazán se disolvió con dimetilsulfóxido y se analizó a 540nm en un espectrofotómetro de microplaca. El ensayo se realizó con tres experimentos independientes. Los datos fueron analizados con pruebas de Kolmogorov-Smirnov (Lilliefors), pruebas de Kruskal-Wallis y comparaciones de Mann-Withney. Resultados: La topografía de las placas de Zr mostraron una mayor rugosidad (Ra=0.39 micrones) en comparación con las de Ti (Ra=0.049 micrones). La cuantificación de la adhesión de HGF fue significativamente mayor (p<0.05) en el Ti, mientras que la proliferación no mostró diferencias estadísticamente significativas entre los grupos. Conclusión: Es importante mencionar que, a pesar de que el Ti mostró inicialmente una mayor adhesión celular sobre la superficie, después de 24 hrs las muestras de Zr mostraron una proliferación similar; lo que demuestra que ambas superficies poseen una respuesta biológica comparable.

Effects of alkaline treatment for fibroblastic adhesion on titanium.

BACKGROUND: The surface energy of titanium (Ti) implants is very important when determining hydrophilicity or hydrophobicity, which is vital in osseointegration. The purpose of this study was to determine how Ti plates with an alkaline treatment (NaOH) affect the adhesion and proliferation of human periodontal ligament fibroblasts (HPLF). MATERIALS AND METHODS: In vitro experimental study was carried out. Type 1 commercially pure Ti plates were analyzed with atomic force microscopy to evaluate surface roughness. The plates were treated ultrasonically with NaOH at 5 M (pH 13.7) for 45 s. HPLF previously established from periodontal tissue was inoculated on the treated Ti plates. The adhered and proliferated viable cell numbers were determined using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide method for 60 min and 24 h, respectively. The data were analyzed using Kruskal-Wallis tests and multiple comparisons of the Mann-Whitney U-test,P value was fixed at 0.05. RESULTS: The mean roughness values equaled 0.04 µm with an almost flat surface and some grooves. The alkaline treatment of Ti plates caused significantly (P < 0.05) more pronounced HPLF adhesion and proliferation compared to untreated Ti plates. CONCLUSION: The treatment of Ti plates with NaOH enhances cell adhesion and the proliferation of HPLF cells. Clinically, the alkaline treatment of Ti-based implants could be an option to improve and accelerate osseointegration.

Growth evolution and phase transition from chalcocite to digenite in nanocrystalline copper sulfide: Morphological, optical and electrical properties.

Copper sulfide is a promising p-type inorganic semiconductor for optoelectronic devices such as solar cells, due its small band gap energy and its electrical properties. In this work nanocrystalline copper sulfide (Cu x S), with two stoichiometric ratios (x = 2, 1.8) was obtained by one-pot synthesis at 220, 230, 240 and 260 °C in an organic solvent and amorphous Cu x S was obtained in aqueous solution. Nanoparticle-like nucleation centers are formed at lower temperatures (220 °C), mixtures of morphologies (nanorods, nanodisks and nanoprisms) are seen at 230 and 240 °C, in which the nanodisks are predominant, while big hexagonal/prismatic crystals are obtained at 260 °C according to TEM results. A mixture of chalcocite and digenite phases was found at 230 and 240 °C, while a clear transition to a pure digenite phase was seen at 260 °C. The evolution of morphology and transition of phases is consistent to the electrical, optical, and morphological properties of the copper sulfide. In fact, digenite Cu1.8S is less resistive (346 Ω/sq) and has a lower energy band gap (1.6 eV) than chalcocite Cu2S (5.72 × 10(5) Ω/sq, 1.87 eV). Low resistivity was also obtained in Cu x S synthesized in aqueous solution, despite its amorphous structure. All Cu x S products could be promising for optoelectronic applications.

Simple one-step ultrasonic synthesis of anatase titania/polypyrrole nanocomposites.

In this work, hybrid nanocomposites based on anatase titania:polypyrrole (TiO(2):PPy) were directly obtained from a simple, one-step, ultrasonic (UT)-assisted synthesis. The properties of these crystalline nanocomposites were compared with those of others fabricated using cold (Cold)-assisted synthesis without any UT assistance, which required a hydrothermal treatment (HT) to yield crystalline anatase titania in the nanocomposite (TiO(2):PPy) at low temperature (130°C) and in a short time (3h). The SEM results demonstrated that the UT-assisted synthesis is a feasible method to obtain anatase TiO(2):PPy nanocomposites with controlled morphology using low energy. The Fourier transform infrared (FT-IR) bands of the crystalline nanocomposites exhibited a shift with respect to neat components, which was attributed to the strong interaction between the secondary amine groups (N-H) of PPy and the oxygen from TiO(2). The acceptable absorption in the visible region (λ(max)=670nm) indicates that these nanocomposites are good candidates for harvesting energy in solar cells. Devices based on these nanocomposites were built to evaluate their electrical properties. An increase in the photocurrent was observed for the devices prepared with the nanocomposites from the UT-assisted synthesis.